Showing posts with label Willys Jeep. Show all posts
Showing posts with label Willys Jeep. Show all posts

09 August 2011

WORKSHOP UPDATE

We are now all back from our various holidays and on the go again.

The work on the WILLYS JEEP is now finished and it is off for MOT on Thursday - the first time it has been on the road for 13 years


The BENTLEY S3 CONTINENTAL is also just about finished and, again, has an MOT on Thursday.


The VAUXHALL 30-98 is back with us due to engine problems.  These appear to have been caused by poor repairs at some time in the past.  Following investigation, including compression and leak down tests, we have found that there is a crack in the cylinder block between  the bore and the valve on No 3 cylinder.  There is a small clip of one of the tests being carried out below:

Our own BULLNOSE MORRIS engine rebuild is finished and the clutch and gearbox have been fitted prior to putting it all back in the car.  Hopefully the sunshine will continue and we can get some outings before rain stops play!

We have also had a number of smaller jobs on the go including changing the alternator on a VW Beetle for some passing German tourists, the red Derby Bentley has been in for a quick service before heading off for a continental tour and Ian had a wee bit of work on an Austin 7 too.

30 June 2011

Other workshop news


Newly cored radiator

Willys Jeep

The radiator is back from having a new core fitted.  The other new parts have now arrived, so we will be back onto the project shortly.







20hp part way through fitting
new king pins and bushes

Rolls Royce 20hp

The king pin and bushes are currently being replaced on Lavinia's N/S front axle


Newly fabricated top water plate visible
under copper pipes in centre of picture

1902 Arrol-Johnston

We have now finished fabricating a replacement top water plate and this can be seen in place on the photo.  Once the oil feed tank and cooling pipes are all back in position and tightened up we can test the car before returning it to its owner.

10 June 2011

1942 WILLYS JEEP

We have been asked to bring this jeep back to being road-worthy and MOTd.  Generally, it is in a pretty good condition, however the brakes and suspension need some work as well as sorting out a leaky radiator.

Parts are fairly easy to come by so wheel cylinders, brake linings, etc have all been ordered up.  The radiator is going away to a specialist we use, as are the springs which need a couple of new leaves and then re-tempering.


Estimating work required
  
Broken brake lining




Front hub stripped

Engine bay




Engine bay following removal of
radiator